A waterproof two-direction joystick controller with a knob handle, designed for industrial machines and equipment that need precise manual positioning in wet or dusty environments.
A brown fused electrical connector block that mounts on DIN rails in control panels and industrial machines to safely join wires with built-in circuit protection.
A heavy-duty industrial push button switch with spring return action, designed for machine control and emergency stop applications in dusty or wet environments.
A grey 13-way electrical wiring block that lets you safely connect multiple cables in industrial panels and machines using a simple push-in method.
A grey industrial electrical connector block that safely distributes power across 7 circuits with high current capacity for factory machines and control panels.
A heavy-duty limit switch with a roller lever that detects machine or door position, widely used in factories and production lines to stop or control equipment.
A durable red emergency stop button that stays pressed until manually reset, used on industrial machines and control panels to safely shut down equipment in emergencies.
A durable metal limit switch with a roller plunger that detects position and triggers electrical signals in machines and industrial equipment, rated for wet and dusty environments.
A small industrial wiring connector that snaps onto standard DIN rails to securely hold 1.5mm² electrical wires in control panels and machines.
A heavy-duty industrial limit switch with a roller lever that detects machine position or movement and triggers electrical actions, rated for up to 690V and harsh environments.
A metal limit switch with a roller lever that detects when machinery or equipment reaches a specific position, commonly used to stop or control motion in industrial machines.
A heavy-duty 18-point electrical connector block that safely distributes power in industrial machines and control panels, rated for high voltage and current.
A small clear indicator light bulb that fits E14 sockets and runs on 24 volts, commonly used to show machine status on control panels.
A compact sealed magnetic switch that detects when a magnet is nearby, used to monitor door/gate positions or stop machine movements in factories and industrial equipment.
A compact magnetic switch that opens or closes an electrical circuit when a magnet is near, rated for 300mA at 110V, commonly used in machine controls and door sensors.
A heavy-duty floor-mounted switch with two pedals that operators press to control electrical equipment, rated for machines up to 10 amps and 600 volts.
A heavy-duty metal safety switch that detects position or presence of machinery parts and cuts power safely; used on industrial machines and conveyor systems.
A 2-position key-operated switch head for controlling industrial equipment, allowing operators to turn machines on/off or select between two modes using a key.
A rugged industrial limit switch with a plunger that detects equipment position and triggers electrical signals; used to monitor machine movement and activate safety interlocks.
A red illuminated emergency stop button that mounts directly into a 16mm panel hole; used on industrial machines and equipment to safely shut down operations in an emergency.
A red emergency stop button that mounts on machine control panels to instantly shut down equipment in emergencies; sealed against water and dust for harsh industrial environments.
A Siemens LED indicator light that shows machine or process status in green, red, or yellow, powered by standard 230V electricity and designed for panel mounting.
A rugged modular push button switch body that latches in position, designed for industrial control panels and machines that need reliable on-off switching in harsh environments.
A durable industrial limit switch with an adjustable roller lever that detects machine position and triggers electrical actions, rated for harsh environments up to IP65 protection.
A square mounting frame adapter for Schneider Electric XB5 series push buttons, used to install control buttons on machine panels and electrical enclosures.
A grey plastic control box with 8 holes for mounting push buttons, used to group multiple controls in one location on industrial machines and equipment.
A grey electrical connector block that mounts on DIN rail and accepts 1.5mm wires with simple push-in connection for control panels and machine wiring.
A rugged electrical limit switch that detects when machinery or equipment reaches a specific position, used to trigger safety stops or automated actions on industrial machines.
A low-power magnetic sensor switch that detects metal movement and maintains position, suitable for industrial machines and equipment operating from -40 to +150°C.
A black selector switch with 3 positions that fits into a 22mm hole in control panels, used to manually select between different operating modes on machines and equipment.
A red electrical terminal block that connects wires in control panels and machines using simple push-spring technology, approved for safe industrial use.
An explosion-proof plunger limit switch rated for use in hazardous environments, detecting machine or equipment position and triggering safety responses up to 400V and 4A.
A two-tier industrial electrical connector block that screws onto DIN rail, used to safely join and organize wiring in control panels and machines.
A small clear indicator light bulb that fits in control panels and equipment, rated for 230V power, designed to show when machines are running or in a specific state.