A beige electrical connector block that mounts on DIN rail, holds wires securely with a clamp, and has a built-in fuse to protect circuits up to 12 amps.
Heavy-duty push-in electrical terminal block for connecting large power cables in industrial panels and control systems.
A large industrial-grade terminal block that connects thick power cables securely to DIN rail systems in electrical panels and machinery.
White electrical connector block that mounts on DIN rail and safely connects wires up to 2.5mm thickness in industrial control panels and machinery.
A yellow electrical connector block for hazardous areas that safely connects 4mm wires to industrial control panels using a screw.
A blue electrical connector block that mounts on DIN rail and lets you connect wires at two different levels using screws.
Heavy-duty power connection block for industrial electrical panels, rated for large cables and high current applications.
Industrial screw-clamp terminal block for connecting 4mm electrical cables to DIN rail in factory control systems, certified safe for explosive environments.
A red emergency stop button that mounts on control panels to instantly shut down machinery; twist the button to release it after pressing.
A standard green and yellow electrical terminal block that plugs onto DIN rail for safe connection of 4mm² wires in industrial control panels.
Black screw-in fused terminal block for mounting on DIN rails in electrical control panels, handles cables up to 2.5mm² with built-in fuse protection.
Heavy-duty electrical terminal block designed to safely connect thick industrial power cables using a bolt fastening system.
Heavy-duty electrical connector block that mounts on DIN rail and accepts bolt-tightened wires for high-current power distribution.
Protective end caps that seal the sides of spring terminal blocks in electrical control panels.
A small electrical connector block that screws onto DIN rail in panels to safely join wires up to 10mm thick, with built-in fuse protection rated for 10 amps.
A blue industrial wiring terminal for hazardous areas, safely connects 4mm electrical cables in control panels and machinery.
A grey electrical connector block that clamps wires securely for control panels and industrial equipment, rated for up to 24 amps.
Black Siemens terminal block for connecting wires in control panels using spring clamps that hold 4mm² cables.
A grey connector block that clamps wires onto DIN rail for electrical panel wiring and machinery connections.
A grey electrical connector block that safely joins wires in control panels and machines using spring clamps instead of screws.
Heavy-duty industrial terminal block for connecting large power cables in electrical distribution panels, rated for 150 amps.
A heavy-duty screw-connected terminal block for joining wires in explosive and hazardous industrial environments, rated for up to 32 amps.
A certified green-yellow grounding terminal block for dangerous areas like oil and gas plants, rated for 6mm² cable with easy push-in connection.
Grey push-in terminal block for electrical control panels that safely connects 4mm cables without fuses, rated for 30–32 amps.
A grey Siemens terminal block that plugs onto DIN rails, designed for safely connecting industrial electrical wiring up to 57 amps.
A safety earth connector for dangerous environments like oil rigs and chemical plants, certified to stop explosions and safely ground electrical wiring.
A grey electrical connector block that safely connects wires up to 4mm thickness on industrial control panels, rated for 24 amps.
A grey connector block that lets electrical wires pass through DIN rail equipment safely, rated for 32 amps.
Industrial ground connection terminal block for DIN rail systems that safely clamps wires up to 4mm² for electrical cabinet earthing.
A grey two-level terminal block that safely connects electrical wires in industrial control panels using screw fastening.
A green electrical terminal block that safely connects 4 mm² wires to control panels and switchboards using spring-clip connection.
A rugged two-button control station with green and red metal buttons in a waterproof aluminium box, used to start and stop industrial machines and equipment.
Black fused terminal block that mounts on DIN rail, accepts wires via push-in connection, and protects circuits up to 20 amps at 400 volts.
A grey fused terminal block that connects electrical wires safely to DIN rail in control panels, with a built-in 6.3 amp fuse for protection.
A Siemens terminal block adapter that connects push button switches to control circuits in industrial control panels.
Black push-in terminal block with 8 connection levels that mount on standard DIN rail for quick electrical wiring in control panels.
Red screw-type electrical terminal block that clips onto DIN rail for safely connecting 4mm² power cables in industrial control panels and electrical enclosures.
Blue two-level wiring terminal block that clips onto industrial control panel rails, rated for 1.5mm² cables up to 600 volts.
A grey grounding block that lets you safely connect three earth wires at once in electrical panels and cabinets.
A beige fused terminal block that mounts on DIN rail to safely connect and protect electrical circuits in control panels and switchboards.