A black push button switch that mounts directly to a control panel to start, stop, or control electrical equipment.
A small black push button switch for control panels that fits through an 8mm hole and handles low-voltage electrical signals in industrial equipment.
A hex nut fastener for securing Schurter push button switches to control panels and equipment.
Illuminated white toggle push button for on-off control in industrial panels.
A red emergency stop push button that mounts on control panels and cuts power when pulled, used to safely shut down machinery in industrial environments.
Grey push button light switch for wall mounting, rated for 10 amps at 250 volts with water-resistant IP55 protection.
A small black push-button switch rated IP40 for controlling electrical equipment, commonly used in industrial control panels and electronic devices.
A rugged push-button control panel for industrial machines and equipment that resists dust and water in harsh outdoor and wet environments.
Small illuminated latching push button for direct PCB mounting in electronics.
A weather-resistant push button control station with three contact switches inside a black polypropylene box, used to start and stop industrial machinery and equipment.
A red emergency stop button that mounts on control panels to instantly shut down machinery, with a key-release mechanism to prevent accidental restart.
A black illuminated push button switch that mounts on control panels and works with EAO Series 51 switch systems for machine and equipment control.
A red emergency stop button with a 22mm opening that you turn to release, used to quickly shut down machinery and equipment on industrial sites.
A heavy-duty red push button switch in a waterproof metal box for controlling machinery and equipment in wet, dusty, or dirty conditions.
A red emergency stop button that mounts on machine control panels to safely shut down equipment in industrial settings.
A small push-button switch used in keyboards, control panels, and electronic devices to send signals when pressed.
A red emergency stop button that mounts on control panels to safely shut down machinery; used on industrial equipment and production lines.
A red illuminated emergency stop button that mounts into a 16mm panel hole and requires a twist motion to release, designed for stopping machinery safely in industrial environments.
A red emergency stop button that mounts on machine control panels to safely shut down equipment in emergencies; requires a twist action to reset.
Yellow plastic housing box for mounting a single push button switch on machines and equipment, designed to protect the button from dust and water splashes.
A red emergency stop button with twist-release mechanism that cuts power to machinery and equipment when pressed, designed for industrial safety applications.
A connector adapter that attaches push buttons to JL and JM series switch systems for industrial control panels and machinery.
RAFIX FS+ series push button switch with universal PCB contact element.
A rugged, waterproof push button switch for mounting directly on circuit boards in wet or dusty industrial environments, rated to resist water and dust ingress.
A red illuminated emergency stop button that mounts on control panels and stops machinery when pressed; requires twisting to reset.
A small black push-button switch for electronic equipment and control panels that activates when pressed and releases when released again.
A red emergency stop button that mounts into control panels to safely shut down machines and equipment in an emergency.
A red emergency stop button with yellow enclosure that instantly cuts power to machinery in wet or dusty factory environments, meeting safety standards for industrial operations.
A red emergency stop button that mounts on control panels and must be twisted to release, designed for wet and high-pressure environments.
A red emergency stop button that mounts on machine control panels and must be twisted to release after pressing, preventing accidental restart.
A red illuminated emergency stop button that mounts into a 30mm panel cutout and works in wet, dusty, or spray conditions for safe machinery shutdown.
A lighted push button switch that mounts on control panels and works with EAO Series 51 systems, rated for 250V AC power.
A yellow emergency stop button that mounts on machine control panels and requires a twist to release after being pressed; used to safely stop machinery in an emergency.
A rugged red emergency stop button with a turn-release mechanism that fits a 22mm hole and resists water, dust, and high-pressure jets for factory and outdoor machinery control.