Blue screw-type connector block that mounts on DIN rail to safely join electrical wires in industrial control panels and machinery.
A brown push-in terminal block designed for safe electrical connections in explosive atmospheres, certified for use in oil, gas, and chemical plants.
A blue fused connector block that mounts on DIN rail, protecting electrical circuits up to 6.3 amps, commonly used in industrial control panels.
Heavy-duty electrical terminal block that connects multiple large power cables together on a DIN rail inside electrical panels and switchboards.
A grey wiring connector block that mounts on DIN rail and uses spring clamps to safely connect electrical wires without screws.
A small electrical connector block with 2 terminals rated for 10 amps and 250 volts, used to join wires in industrial equipment.
A black electrical connector that mounts on DIN rail for safely connecting thick electrical wires in control panels and machinery.
A 12-way screw terminal block for safely connecting multiple wires in control panels and industrial equipment.
Heavy-duty electrical connector block for dangerous and explosive areas, certified safe and suitable for oil, gas, and chemical industry wiring.
A standard grey terminal block that connects electrical wires to DIN rails in control panels and electrical cabinets.
A protective cover that shields meter terminal block connections on industrial electrical panels.
Brown electrical connector block for industrial panels that accepts 4mm² wires and provides a safe test and disconnect point.
A blue electrical connector block that quickly clamps 4mm² wires without tools, rated for up to 24 amps in industrial control panels.
A grey electrical connector block that safely joins wires together inside control panels and electrical cabinets, handling up to 57 amps.
A grey electrical connector block that sits on standard DIN rail and safely connects two wires at a time using a simple clamp mechanism, rated for high voltage industrial use.
Industrial-grade black terminal block for safely connecting wires in control panels and electrical cabinets.
A protective cover that slides onto terminal blocks to keep hands and dust away from live electrical connections.
A blue screw-connection electrical terminal block rated for explosive atmospheres, designed for safe wiring in oil, gas, and chemical plants.
A grey electrical connector block that clips onto a DIN rail and securely holds industrial wiring up to 41 amps.
A yellow industrial wiring connector with four terminals and screw clamps, designed to safely split and distribute electrical circuits in control panels.
Red electrical terminal block that mounts on DIN rail and uses a screw to tighten wires securely.
A blue screw-terminal connector block that mounts on DIN rails to connect industrial electrical wires safely in control panels and machinery.
An explosion-proof electrical connector block designed for hazardous industrial areas, with fast clip-on wire termination.
A beige connector block that mounts on DIN rail and lets you quickly wire cables up to 6mm² in electrical panels.
A blue electrical connector block that lets you wire cables together safely inside control panels, rated for 32 amps.
A blue electrical connector block that screws onto DIN rails and safely connects wires in industrial control panels and machinery.
Beige electrical connector block for industrial control panels that lets you connect wires safely on standard mounting rails.
Blue electrical connector that joins wires together on industrial control panels, rated for 32 amps and 1000 volts.
A grey electrical connector block that clips onto standard DIN rail, designed to join and distribute power cables up to 4mm thickness safely.
A blue wire connector block that mounts on control panel rails and safely connects industrial electrical wires up to 4mm thickness.
A blue industrial connector block that attaches to DIN rail and safely joins wires up to 2.5mm² in electrical control panels.
Heavy-duty electrical connector block that bolts onto standard DIN rails to safely connect power wires in factory control panels and machinery.
Blue four-tier electrical connector block that clips onto DIN rail; connects multiple wires without screws using push-in terminals.
A three-layer electrical connector block that mounts on DIN rail and uses screw terminals to securely connect wires in control panels.