A waterproof industrial limit switch with a roller plunger that detects when machinery reaches a specific position and sends an electrical signal to control or stop the machine.
A waterproof industrial limit switch with a plunger that detects when machinery reaches a specific position, commonly used on conveyor systems and machine guards.
Industrial vibration monitoring system for detecting equipment faults and preventing breakdowns.
Photoelectric multi-code reader with 38-60mm range, connector interface for factory automation.
![APEM Capacitive Switch Latching,Illuminated, Green, Red, NPN, IP68, IP69K [blank]](https://cdn.agacangroup.com/api/catalogimage?olcusu=180&kalite=70&marka=APEM&model=CPB2210000KGSC&sirasi=0)
A waterproof push-button switch with green and red lights that stays on until pressed again, designed for wet and dirty industrial environments.
Industrial pressure switch for gas and liquid systems, adjustable 0.5 to 8 bar range.
Stainless steel magnetic safety switch for harsh and corrosive industrial environments.
Two-meter Type K thermocouple extension cable for industrial temperature measurement up to 220°C.
Heat-resistant float switch for horizontal tanks rated to 120°C with dual outputs.
Solid state switch compatible with multiple SMC pneumatic cylinder series.
SMC pneumatic pressure switch for low-pressure air systems with push-in connection.
SMC pneumatic pressure switch for air systems, detects 0.7 MPa pressure changes.
Compact pressure switch for low-pressure compressed air applications and vacuum monitoring.
Current monitoring device measuring electrical flow up to 200 amps in industrial systems.
High-temperature Type K thermocouple reaching 1100°C for industrial furnace monitoring.
High-frequency Rogowski coil transformer for large industrial power measurement and monitoring.
Phoenix Contact temperature converter accepts RTD and thermocouple inputs with relay outputs.
Automatic light control switch that turns lights on and off based on daylight levels.
High-performance lithium battery for specialized industrial and security equipment applications.
Temperature-sensing switch that automatically cuts power when heat exceeds safe limits.
Stainless steel float switch with long cable for corrosive liquid level monitoring.
K-type probe with rounded tip for non-invasive surface temperature measurement.
Automatic temperature switch that opens at 50°C and closes at 35°C for heating equipment control.
Waterproof solid state switch for pneumatic cylinder position detection with visual indicator.
Magnetic safety interlock switch for industrial machine guarding and emergency stop systems.
Brass shunt for measuring electrical current up to 2 amperes with ammeter.
A rugged plunger-activated limit switch that detects when machinery or equipment reaches a specific position, commonly used in factories and industrial automation to trigger alarms or stop movements.
Schmersal RFID coded safety switch for machinery interlocking with high safety category.
Banner SLL light curtain with 23mm resolution for industrial area safety guarding.
Split core current transformer for measuring AC electrical current in industrial control systems.
Flush-mounted inductive switch for seamless integration in machine guarding systems.
An Eaton limit switch operating head that detects position and triggers electrical responses, used to stop machinery when it reaches set points on production lines and automated systems.
Industrial pressure switch for monitoring high-pressure systems up to 50 bar.
An industrial limit switch with a plunger that detects position and movement in wet or dusty environments, rated for motors and machinery up to 415V.
Advanced networked I/O module with high port count for complex automation systems.
Liquid level control relay monitors and controls water or fuel levels in tanks automatically.
Type K thermocouple extension cable with glass fibre insulation for temperature measurement in industrial equipment.
A rugged industrial limit switch that detects when machinery or moving parts reach a specific position and sends an electrical signal to stop or control the equipment.
PTC thermistor rated to one hundred twenty degrees for temperature-based protection and control.
A sealed industrial limit switch with a roller lever that detects object position and triggers electrical actions, used to automate machinery and safety systems on production lines and mechanical equipment.