A white LED indicator light that mounts flush on control panel doors to show equipment status or operational state, rated for wet and dusty environments.
An illuminated two-position selector switch with a 30mm mounting hole, used to manually select between two electrical circuits or equipment states on control panels.
A small clear indicator light bulb that fits in control panels and equipment, rated for 230V power, designed to show when machines are running or in a specific state.
A red-handled selector switch with two positions, mounted through a 29.5mm hole in control panels to manually select between two operating modes or states.
A three-position selector switch with a short handle that mounts into a 22.5mm hole in control panels to select between different operating modes or equipment states.
A white-handled 2-position selector switch with a 22mm panel cutout for industrial control panels and machinery operators to select between two modes or states.
A 3-position selector switch with a white lever handle used to control machinery and equipment by allowing operators to select between three different operational states.
A white LED indicator light that mounts on control panels to show machine status or power state, rated for 120V operation with dust and water protection.
A heavy-duty illuminated selector switch with 2 positions and blue actuator, used to switch between two operational states on industrial equipment and control panels.
A three-position key-operated switch for controlling equipment and machinery on industrial control panels, commonly used to select between operating modes or control states.
A 2-position key-operated switch for industrial control panels that maintains its position once turned, used to select between two operational states on machinery or equipment.
A 3-position illuminated selector switch with a white handle that mounts on a 22mm panel cutout, used to control equipment between three different states or modes.
A two-position selector switch head with a 30.5mm mounting hole, designed for industrial control panels and machines that need to switch between two operating states.
A rugged 2-position latching key switch for industrial control panels and machinery, allowing operators to select between two states and lock the position until the key is turned again.
A heavy-duty industrial key-operated selector switch with three positions, designed to control or select between equipment states in wet and dusty factory or outdoor environments.
A waterproof illuminated selector switch with three positions and a blue handle, used on industrial control panels to manually select between different operating modes or equipment states.
A 2-position selector switch with a black handle for mounting in industrial control panels; selects between two operational states and stays in the selected position until manually changed.
A rugged illuminated two-position selector switch rated for 6A at up to 600V, commonly used on control panels and machinery to manually select between two operational states.
A two-position selector switch head from Schneider Electric that fits into a 22mm panel cutout and allows operators to choose between two states or modes in industrial equipment.
An illuminated 3-position orange selector switch head for industrial control panels that fits a 22mm hole and allows operators to select between three modes or states.
A yellow-handled 3-position selector switch that mounts into a 22mm panel cutout to let operators manually control equipment between three different modes or states.
A yellow-handled 2-position illuminated selector switch with a 22.5mm mounting hole, designed for control panels and machinery to select between two operational states.
A 2-position latching key switch for industrial control panels that holds its setting until manually switched, commonly used to lock machinery in safe or operational states.
A three-position industrial selector switch with a black handle and 22mm mounting hole, used to manually select between different machine or process states on control panels.
A three-position illuminated red selector switch head that mounts in a 30mm hole and is used on industrial control panels to select between different operational modes or states.
A two-position key-operated latching switch for industrial control panels that allows secure manual selection between two operating states and can be locked in any position.
A rugged two-position rotary selector switch with a 22mm panel cutout, designed for industrial control panels and machinery where reliable switching between two states is needed.
A three-position manual selector switch from Schneider Electric that allows operators to choose between three different operating modes or states in industrial control panels and machinery.
A rugged 3-position key-operated switch that stays in the position you turn it to, used on control panels and machinery to select between different operating modes or equipment states.
A white LED indicator light that mounts into a 22mm hole in control panel doors to show machine status or operational state, powered by standard 230V electricity.
A two-position manual selector switch from Schneider Electric that lets operators choose between two electrical states or circuits, commonly used on control panels and machinery.
A yellow LED indicator light that mounts into a 22mm hole in control panels to show machine status or operational state, rated for indoor and outdoor wet conditions.
A rugged 2-position rotary selector switch with 22mm panel cutout, designed for industrial control panels and machinery to safely switch between two operational states.
A robust 2-position selector switch head with a 22mm mounting cutout, designed for industrial control panels and machinery where operators need to select between two operational states.