A non-illuminated key switch head from Eaton's Moeller series used to control machinery and equipment manually with a key insert.
A key-operated switch head from Eaton that uses Ronis keys to control industrial machinery and equipment on factory floors and construction sites.
A white single rocker light switch rated for 10 amps that lets you control lights from two different locations.
A mechanical key-operated switch head from Eaton used to control industrial equipment and machinery by turning a key, commonly found in control panels and equipment enclosures.
A small rotary selector switch that lets you set equipment to one of 16 different codes by turning it.
A ten-position rotary selector switch that mounts directly into circuit boards to configure equipment settings, rated for 24V electrical systems.
A small sealed magnetic switch rated for 500mA that activates when brought near a magnet, commonly used for door alarms and equipment sensors.
A round plunger head that attaches to RACON tactile switches to detect when machinery or doors reach specific positions.
A small rotary selector switch that mounts directly on circuit boards and lets you choose from 16 different settings for controlling equipment.
An illuminated 2-position key switch for controlling equipment on/off or selecting between two operating modes on control panels.
A sealed plastic position switch that detects when machinery or equipment reaches a specific location, rated for wet and dusty environments.
A durable 2-position key switch that locks in place when turned, commonly used to control equipment start/stop or mode selection on machinery and control panels.
A key-operated switch head from Eaton that mounts on control panels to enable secure access control for machinery and electrical systems.
A small sealed magnetic switch that opens and closes an electrical circuit when a magnet is nearby, commonly used in door sensors and industrial automation systems.
A small rotary switch that mounts on circuit boards to set 16 different configuration options for electronic equipment.
A small rotary selector switch that mounts directly onto circuit boards and lets you choose between 9 different settings for equipment configuration.
A replacement blue switch insert module for standard wall switches in homes and offices.
A rugged 2-position key switch that stays in place when turned, rated for dusty and wet environments, commonly used to control machinery and equipment on industrial sites.
An IP67 sealed tactile push button switch with a 0.7mm profile, rated for 50mA at 24V DC, designed for industrial control panels and keypads in harsh environments.
A durable industrial plunger switch that detects when machinery doors or guards are opened or closed, with both normally open and normally closed contacts for safety control.
A magnetic switch that turns on and off when exposed to magnetic fields, rated for up to 270mA at 264 volts AC, used in alarms, door sensors, and industrial controls.
A non-illuminated key switch head from Eaton that allows operators to lock and unlock equipment or control circuits using a key, commonly used on machinery and control panels.
A small rotary switch that lets you set different electronic equipment configurations by rotating and selecting one of four positions.
An Omron 16-position rotary switch for electronics configuration and control, mounted directly to circuit boards.
A small tactile push-button switch used in keyboards, keypads, and electronic control panels to register user input when pressed.
A small magnetic switch that turns circuits on and off when exposed to a magnet, rated for 500mA and 140V AC power applications.
A key-operated switch head for industrial control panels that allows authorized personnel to start, stop, or control equipment by turning a key.
A white 2-way light switch rated for 10 amps, part of Schneider Electric's Odace range for standard household electrical installations.
A small 10-position rotary switch that lets you set equipment options by turning a dial, commonly used in control panels and electronic devices.
An 8-position rotary switch that lets you set up to 8 different settings on industrial equipment using a simple turning dial.
A small pink push-button switch used in control panels, keyboards, and electronic equipment to turn circuits on and off.
A small rotating switch that helps control electrical devices by selecting between 3 different settings, commonly used in equipment control panels and circuit boards.
A black 2-way electrical switch that controls lights or devices from two different locations, rated for 10 amps.
Small rotary switch with 10 positions for setting equipment codes and configurations on circuit boards.
A manual selector switch with two positions that connects one input to either of two outputs, commonly used in control panels and equipment to switch between different operational modes.
A small rotary switch with 16 selectable positions that solders directly onto circuit boards for equipment configuration and control.
A grey electrical switch module that controls lights or devices from two locations, rated for 10 amps at 250 volts.
A waterproof illuminated touch switch that stays in the on or off position and works in wet or dusty environments.
A small magnetic switch that activates when exposed to a magnet, rated to control up to 300mA at 110 volts, commonly used in security systems and equipment monitoring.
A rugged 2-position key-operated latching switch with a 30mm mounting hole, designed for secure access control and equipment lockout in industrial and outdoor environments.