Tiny 12V electric push-pull for precision positioning in compact machinery.
Handheld force gauge for measuring pulling and pushing forces in field operations.
Compact 24V solenoid with 110oz pull force for heavy-duty industrial control.
Industrial 17.5V DC solenoid with 25.4 Newton pulling force.
SKF hydraulic bearing puller set with 110mm capacity and 3000N pulling force.
Compact electric linear actuator for precise push-pull motion in automated systems.
Heavy-duty load cell measuring both push and pull forces up to 300 kilograms.
Eco-friendly kitchen mixer tap with pull-out spray for water-efficient cooking.
Small electric push-pull motor for precise positioning in automation and control systems.
Red round lifting sling rated for 5 tonnes in straight pull applications.
22-ton hollow plunger hydraulic cylinder for industrial pulling and extraction applications.
Electric rod actuator for automated pushing and pulling in industrial machinery and production lines.
12-ton hollow plunger hydraulic cylinder for lightweight pulling and tensioning work.
Portable 30-tonne hydraulic pulling cylinder for industrial lifting and pressing applications.
Small electric linear actuator for 12V systems, pushes and pulls 50mm with 300N force.
WIKA industrial strain gauge measuring push and pull forces via M12 connector.
Five-metre purple webbing lifting sling with one-tonne straight-pull capacity.
Small electric linear actuator for precise pushing and pulling movements in automated machinery and equipment.
A protective housing that shields cable connections on terminal blocks, preventing wires from being pulled loose.
Kübler cable pull encoder with analog output and network interface for industrial measurement systems.
Green round endless sling lifting 2 tonnes in multiple leg pull configurations.
Polymer cable draw wire routing tool for pulling and managing cables up to 20 meters.
Compact 12-ton hollow plunger cylinder for light industrial pulling and alignment work.
200kg S-type load cell for measuring both compression and tension in lifting and pulling applications.
Tiny 13-ton hollow plunger Enerpac cylinder for precision industrial pulling and adjustment.
High-leverage pliers for powerful gripping and pulling tasks in heavy industrial maintenance work.
Ash-handled steel claw hammer for nailing, pulling nails, and general construction work.
Four-metre red webbing lifting sling rated five-tonne straight pull.
Deltrol 12V DC push solenoid with 35.9N pulling force, 6.35mm stroke.
Two-meter black webbing sling rated for 2.5 tonne straight pull loads.
3-metre brown webbing lifting sling rated for 6 tonne straight pull loads.
Heavy-duty belt-driven linear actuator for fast automated pushing and pulling in industrial machinery.
High-power 11.5V DC solenoid with 120.1 Newton extreme pulling force.
A protective plate that attaches to WAGO 769 connectors to support and protect cables from strain and pulling damage.
6-meter red round lifting sling rated for 5 tonnes in straight pull applications.
1.5-meter yellow round polyester lifting sling rated for 3 tonne straight pull.
A protective plate that holds cables in place on electrical terminal blocks, preventing them from pulling loose in industrial equipment.
A protective plate that attaches to WAGO terminal block connectors to prevent cable pulling and damage during industrial electrical work.
A protective support plate that attaches to DIN rail terminal blocks to keep cables secure and prevent damage from bending or pulling.
An energy-efficient compact fluorescent bulb that fits standard office and shop light fixtures, providing warm white light with easy snap-pull installation.