A 3-position key-operated switch with spring return function that mounts in a 22mm panel cutout, commonly used to control industrial equipment and machinery.
A white-handled illuminated selector switch that lets operators choose between two positions; commonly used in control panels and machinery to select modes or functions.
A 2-position selector switch head that fits a 22mm hole in control panels, allowing operators to choose between two functions with spring-return operation.
A three-position selector switch head for industrial machinery and equipment that allows manual selection between different operating modes, sealed against dust and water spray.
A three-position manual selector switch with a 22mm mounting hole, commonly used in industrial control panels to select between different operating modes or functions.
A white decorative cover frame that holds four power outlets or switches side-by-side on your wall, combining modern design with practical electrical function.
A red mushroom-shaped emergency stop button that mounts on control panels to instantly shut down machinery; sealed against dust and water spray for tough environments.
A two-position electrical selector switch rated for 250V AC that lets operators choose between two different circuits or functions on machinery and control panels.
A 4-position rotary selector switch with a 22mm mounting hole for industrial control panels; used to select between different equipment operating modes or functions.
A 3-position illuminated selector switch for industrial control panels that lets operators select between three different modes or functions with a clear visual indicator.
An Eaton key-operated switch head that lets operators start, stop, or select functions on industrial machinery and control panels using a Ronis key.
An illuminated push button switch that mounts directly into control panels and works with EAO Series 31 equipment to start, stop, or signal functions on industrial machines.
A 3-position selector switch head from ABB that lets operators choose between three different settings, protected against dust and water spray for outdoor and wet environments.
A tough, waterproof 4-button keypad with die-cast zinc housing for industrial control panels and outdoor equipment that needs to resist dust and water spray.
A heavy-duty two-pedal foot switch with emergency stop function, housed in an aluminum case, used to control machinery and equipment by foot in industrial environments.
A black foot-operated switch that you press to activate machinery or equipment temporarily, connected via USB and programmable for custom control functions in light industrial settings.
A stylish Legrand key switch in smoked color that lets you control a lamp or group of lamps from one location, combining practical function with modern minimalist design.
A red illuminated emergency stop button with turn-to-release mechanism that withstands water spray and harsh environments, used to safely shut down machinery in industrial settings.
A foot-operated electrical switch that activates equipment hands-free, commonly used in industrial machinery and workshop equipment to control power or functions by foot pressure.
A replacement cap for EAO 09 Series keypads that displays a partial backward delete symbol, used to mark function keys on industrial control panels and machines.
A three-position selector switch with spring return to center, rated for 600V and 6A, used to select between different electrical circuits or machine functions on control panels.
A red replacement cap for APEM PHAP5-30 tactile switches used on control panels and industrial equipment to indicate button function and improve operator feedback.
A waterproof 12-key industrial keypad with a black polymer case that withstands dust and water spray, used for control panels and machinery interfaces in harsh environments.
A two-direction joystick control switch for industrial machines and equipment, rated for 125V AC power, allowing operators to command movement or functions in two axes.
A rugged red LED indicator light that mounts on control panels to show equipment status, sealed against dust and water spray for outdoor and wet industrial areas.
A blue illuminated selector switch with 3 positions that mounts in a 22mm hole on control panels and machine dashboards to let operators choose between different modes or functions.
A three-position key-operated selector switch with a 22mm cutout and black handle, used in industrial control panels to select between different operating modes or functions.
A blue replacement cap for APEM PHAP5-50 series tactile switches, commonly used in industrial control panels and keyboards to identify or customize button functions.
Heavy-duty emergency stop button with key release that mounts in a 22mm panel opening and resists water, dust, and harsh spray for machinery and control cabinets.
A rugged dual push button control switch with red and green buttons for starting and stopping machinery, protected against dust and water spray in harsh industrial environments.
A green-lit industrial push button switch that detects touch without moving parts, resists heavy water spray, and connects to smart factory systems.
A durable industrial limit switch with a roller plunger that detects the position of machinery and equipment, commonly used to trigger stopping or alarm functions on production lines and equipment.
A red emergency stop button that mounts on machine control panels and stops equipment instantly when twisted; designed for dusty, wet, and high-pressure spray environments.
A small push-button switch with a gold tactile actuator, surface-mounted on circuit boards, rated for 20 mA at 15V and protected against dust and water spray.
A modular switch body component for APEM A01 series push button switches, used in control panels and industrial equipment to allow operators to turn functions on and off.
A three-position selector switch with a short lever handle that fits a 22.5mm hole in control panels, used to select between different operating modes or functions.
A three-position illuminated selector switch with a 22mm mounting hole, designed for industrial control panels and machinery requiring operator selection between different modes or functions.
A rugged push button control station with a plastic weatherproof housing that resists dust and water spray, used to start, stop, or control machinery and equipment on job sites.
A blue-handled two-position selector switch for industrial control panels that lets operators toggle between two functions; commonly used on machinery and production line equipment.
An industrial limit switch with a roller plunger that detects when machinery or doors reach a specific position, rated for wet environments and wired to control equipment start/stop functions.