A heavy-duty three-position key-operated electrical switch for controlling machinery and equipment in industrial settings, with weatherproof protection for outdoor and wet environments.
A small rotary coded switch that mounts directly on circuit boards and lets you set different electrical configurations by turning the dial to 16 different positions.
A plunger-activated limit switch that stops or starts machinery when a moving part reaches a set position, rated for industrial AC and DC circuits up to 500V.
A small rotating switch that helps control electrical devices by selecting between 3 different settings, commonly used in equipment control panels and circuit boards.
A heavy-duty position detection switch with a lever arm that triggers when machinery reaches a set point, sealed against dust and water for harsh industrial environments.
A rugged industrial limit switch with a roller arm that detects when moving equipment reaches a set position, sealed against dust and water for factory and outdoor use.
A small 4-position switch that mounts flat on circuit boards to configure device settings, with gold-plated contacts rated for low-voltage electronics.
A Omron limit switch with a hinge lever that detects when moving equipment reaches a set position, rated for up to 125V AC power in dusty industrial environments.
A heavy-duty blue electrical connector block that safely splits high-voltage power across six separate circuits in factory and industrial settings.
A rugged metal limit switch that detects when machinery reaches a set position and sends a signal to control equipment, suitable for wet and dusty industrial environments.
A heavy-duty limit switch with a plunger actuator that detects when machinery reaches a set position and triggers electrical circuits; used in automation and safety systems.
A 6-position electronic switch that mounts directly into circuit boards and lets you manually select different configuration settings by flipping individual raised buttons.
A lever-operated limit switch that detects when machinery or moving parts reach a specific position, used to control or stop equipment in factories and industrial settings.
A robust industrial limit switch with a roller lever that detects position and movement on machinery; widely used to stop or control equipment when it reaches a set location.
A 6-position electrical switch that mounts on circuit boards and lets you configure equipment settings with easy-to-flip switches, rated for 24-volt systems.
A 10-position piano-key dip switch that mounts directly onto circuit boards and lets operators set configuration options for industrial equipment.
A grey electrical connector block that lets you safely distribute power and signals from one main line to multiple circuits in factory and control panel settings.
A sealed industrial limit switch with a roller lever that detects when machinery or moving parts reach a set position, commonly used on factory equipment and conveyors.
A weatherproof magnetic position sensor that detects when metal objects are nearby, commonly used to monitor machinery movement and gate/door positions in industrial settings.
A 2-position manual selector switch head made by Idec that lets operators choose between two different control settings in industrial equipment and machinery.
A black three-position selector switch with a knob handle that fits into a 22mm panel opening, used to control machinery and equipment in factories and industrial settings.
A heavy-duty key-operated selector switch that lets operators manually choose between two settings in industrial control panels, protected against water and dust.
A 16-position rotary selector switch that mounts directly onto circuit boards and lets operators choose between different settings or modes in electrical equipment.
A 2-position latching key switch with a 22mm panel cutout, used to control machinery and equipment on/off or select between two operating modes in industrial settings.
A waterproof industrial limit switch with a roller lever that detects position and triggers machine control, commonly used to stop or reverse equipment at set locations.
A red emergency stop button that mounts on control panels and requires a twisting motion to release; used to quickly shut down machinery and equipment in industrial settings.
A robust industrial limit switch with waterproof design that detects when moving equipment reaches a set position and triggers electrical signals to stop or redirect motion.
A rugged Honeywell limit switch with a plunger that detects when machinery reaches a specific position, commonly used to stop or control equipment movement in industrial settings.
A 10-position surface-mounted switch that lets you select different settings on circuit boards using a screwdriver, rated for industrial control and electronic equipment.
A small two-position electrical switch that mounts directly onto circuit boards and controls 24V circuits, commonly used for equipment configuration and settings.
A rugged industrial limit switch with a plunger that detects when machinery parts reach a set position, rated for wet and dusty environments and suitable for control circuits up to 600V.
An industrial plunger limit switch that detects when machinery reaches a set position and triggers an electrical signal to stop or control the motion, used in factories and automation systems.
A red illuminated emergency stop button with turn-to-release mechanism that withstands water spray and harsh environments, used to safely shut down machinery in industrial settings.
A rugged limit switch with a plunger that detects position and triggers an electrical signal when machinery or equipment reaches a set point; widely used in industrial control systems.
A rugged waterproof limit switch with a roller plunger that detects when moving machinery or objects reach a set position, commonly used on factory equipment and production lines.
A 3-position selector switch head from ABB that lets operators choose between three different settings, protected against dust and water spray for outdoor and wet environments.
A durable industrial limit switch with a roller lever that detects machine position or movement and triggers electrical actions, rated for up to 250V and 15A in factory and automation settings.
A 2-position latching key switch for industrial control panels that holds its setting until manually switched, commonly used to lock machinery in safe or operational states.
A two-position latching key switch with a 22mm panel cutout, used to control machinery and equipment operation with key-based access control in industrial settings.
A rugged industrial limit switch with a roller lever that detects position and movement, used to stop machinery or trigger actions when a moving part reaches a set point.