A rugged industrial limit switch that detects the position of moving parts on machinery, used to stop or control equipment when it reaches a set location.
A white wall-mounted light switch with built-in timer to automatically turn lights on or off at set times, saving energy in homes and offices.
A waterproof touch-activated electrical switch with a red light that can be set to stay on or turn off with each press, suitable for wet industrial environments.
A small 2-position electrical switch that mounts flat on circuit boards, commonly used to control industrial equipment settings and configurations.
A compact electronic ballast that powers high-intensity discharge lighting fixtures in industrial and commercial settings using 220-240V electricity.
A two-position selector switch with a black handle for industrial control panels, allowing operators to choose between two settings on equipment or machinery.
A red emergency stop button that mounts on control panels to safely shut down machinery in industrial settings; press to stop, pull to reset.
A two-position key switch head with a 22.5mm cutout for controlling machinery and equipment; stays in the position you set it until manually changed.
A 16-position rotary switch that mounts flat on circuit boards and is adjusted with a screwdriver, used to set configurations in industrial control equipment.
An 8-position selector switch that mounts flat on circuit boards and lets you configure equipment settings using small sliding switches.
A 6-position electrical DIP switch that mounts directly onto circuit boards and helps configure equipment settings with raised buttons.
A rugged metal limit switch that detects when machinery or equipment reaches a set position, stopping or controlling the motion to prevent damage or accidents.
A small rotary selector switch that mounts on circuit boards and lets you set 16 different configuration options using hexadecimal codes.
An 8-position electrical switch that mounts flat on circuit boards and lets you set equipment configurations by pressing individual piano keys.
A 10-position slide switch that mounts flat on circuit boards to control equipment settings, rated for 24V and 50V DC power.
A waterproof industrial limit switch that detects when machinery or moving parts reach a set position, rated for up to 600 volts and 10 amps.
A small 6-position switch that mounts directly onto circuit boards and is commonly used to set up or configure industrial electrical equipment.
A sealed safety switch that detects when machinery reaches a set position and stops or controls the motion, used on production lines and industrial equipment.
A waterproof illuminated touch switch with colored light that works with low-voltage industrial equipment and can be set to stay on or turn on momentarily.
An 8-position electrical switch that mounts directly onto circuit boards and lets you configure equipment settings by flipping individual switches on or off.
A rotary pushwheel switch with 10 numbered positions (0-9) that mounts on control panels to select different equipment modes or settings.
A 3-position selector switch with a black handle that mounts in a 22mm panel opening, used to control machinery and equipment in industrial settings.
A small 4-position manual selector switch that mounts directly onto circuit boards and allows operators to configure equipment settings.
A white-handled 3-position selector switch for industrial control panels that lets operators choose between three settings with illuminated feedback.
A sturdy 2-position key-operated switch for controlling electrical equipment in industrial and commercial settings, installed in a 22mm panel cutout.
A red emergency stop button that latches in place when pressed, sealing out dust and water, used to safely shut down machinery in industrial settings.
A small rotary switch with 10 positions that mounts directly on circuit boards and is used to set configurations or select options in industrial equipment.
A 22mm black-handled selector switch with 2 positions for mounting on control panels to allow operators to select between two modes or settings.
A small rotary switch that mounts directly on circuit boards and lets you select from 16 different settings using a hexadecimal code system.
A small rotary dial switch that mounts directly on circuit boards to select one of 16 different settings using coded outputs.
An automatic timer light switch that turns lights on and off at set times, rated for 16 amps and suitable for wet indoor or outdoor areas.
A small three-position slide switch that mounts flat on circuit boards and is used to configure settings in control systems and electronic equipment.
A quality electrical junction box from Legrand that mounts on drywall and holds two sets of electrical outlets or switches in one compact unit.
A black knob selector switch for industrial control panels that lets operators choose between two settings, installed in a standard 22mm hole.
This is a 6-position slide switch that mounts directly onto circuit boards to configure equipment settings, made by trusted brand Omron.
A weatherproof metal limit switch that detects when moving equipment reaches a set position and stops it safely, rated for wet industrial environments.
This is a small 4-position electronic switch that you press to configure settings on circuit boards and control panels, rated for 24V industrial equipment.
A small rotary selector switch that mounts directly onto circuit boards and lets you choose between 9 different settings for equipment configuration.
A 3-position switch that mounts directly onto circuit boards and is commonly used in industrial equipment control panels and configuration settings.
A small dual-channel electrical switch that mounts into circuit boards and allows you to configure equipment settings with two raised button positions.