A lever-type operating head for limit switches that detects when machinery reaches a set position and triggers an electrical signal to stop or control movement.
A heavy-duty plunger limit switch that detects when machinery reaches a set position and sends an electrical signal to stop or control equipment movement.
A roller lever head that attaches to Eaton limit switches to detect when machinery or moving parts reach a set position and trigger electrical controls.
A red emergency stop button that mounts on control panels and requires a key to reset after pressing, used to safely shut down machinery in industrial settings.
A rugged foot-operated electrical switch that activates when pressed and releases when lifted, used to control machinery and equipment hands-free in industrial settings.
A compact two-hole push button enclosure for mounting control switches and emergency stop buttons on machinery and control panels in industrial settings.
A red emergency stop push button that mounts on control panels to safely shut down machinery in industrial settings, requiring a key to reset after pressing.
A small 3-position switch that mounts directly into circuit boards, allowing operators to set different configurations using a raised toggle lever.
A 16-position rotary selector switch that mounts flat on circuit boards to set equipment configurations, rated for industrial use up to 24 volts.
A heavy-duty position detection switch with a lever arm that triggers when equipment reaches a set location, commonly used on machinery and automation systems.
A rugged Siemens position sensor with a lever arm that triggers when machinery reaches a set point, fully sealed against dust and water for factory floors.
A small rotary switch that mounts on circuit boards and lets you select from 10 different settings using coded positions for industrial control equipment.
A 10-position rotary switch that mounts flat on circuit boards and is adjusted with a screwdriver, commonly used for device configuration and settings in industrial equipment.
A 6-position electrical switch that mounts on circuit boards and lets you configure equipment settings with easy-to-flip switches, rated for 24-volt systems.
A rugged waterproof switch that detects when machinery or equipment reaches a set position, commonly used to stop or control equipment on factory floors and construction sites.
An 8-position electronic switch that mounts directly onto circuit boards to configure settings, made by TE Connectivity with copper contacts rated for 5V.
A 6-position electronic switch that mounts directly into circuit boards and lets you manually select different configuration settings by flipping individual raised buttons.
A rugged Siemens position-sensing switch with a plunger that detects when machinery or equipment reaches a set location, commonly used to stop or control machine movement.
A 2-position latching key switch with a 22mm panel cutout, used to control machinery and equipment on/off or select between two operating modes in industrial settings.
A heavy-duty key-operated selector switch that lets operators manually choose between two settings in industrial control panels, protected against water and dust.
A 2-position manual selector switch head made by Idec that lets operators choose between two different control settings in industrial equipment and machinery.
A rugged industrial safety limit switch that detects machine or equipment position and stops operation when a set point is reached, used in factories and automation systems.
A 10-position surface-mounted switch that lets you select different settings on circuit boards using a screwdriver, rated for industrial control and electronic equipment.
A small two-position electrical switch that mounts directly onto circuit boards and controls 24V circuits, commonly used for equipment configuration and settings.
A robust industrial limit switch with waterproof design that detects when moving equipment reaches a set position and triggers electrical signals to stop or redirect motion.
A waterproof lever-operated limit switch that stops or starts equipment when something reaches a set position, suitable for wet or dusty factory and outdoor environments.
A rugged electrical limit switch that detects when machinery reaches a set position and safely stops or triggers the next operation, rated for 240V AC power.
A three-position illuminated selector switch for industrial control panels that lets operators choose between different equipment modes or settings with a clear visual indicator.
A rugged industrial limit switch with a roller plunger that detects when moving machinery reaches a set position, then triggers an electrical signal to stop or control the motion.
A weatherproof magnetic position sensor that detects when metal objects are nearby, commonly used to monitor machinery movement and gate/door positions in industrial settings.
A small rotating switch that helps control electrical devices by selecting between 3 different settings, commonly used in equipment control panels and circuit boards.
A waterproof and dustproof position sensor with a roller arm that detects when machinery or moving parts reach a set location, commonly used on production lines and gates.
A heavy-duty limit switch that detects when machinery or equipment reaches a set position, and automatically triggers electrical controls to stop, start, or change direction.
A rugged sealed industrial limit switch that detects when machinery reaches a set position and triggers electrical control circuits, rated for wet and dusty environments.
A 10-position piano-key dip switch that mounts directly onto circuit boards and lets operators set configuration options for industrial equipment.
A lever-operated limit switch that detects when machinery or moving parts reach a specific position, used to control or stop equipment in factories and industrial settings.
A rugged metal limit switch that detects when machinery reaches a set position and sends a signal to control equipment, suitable for wet and dusty industrial environments.
A heavy-duty blue electrical connector block that safely splits high-voltage power across six separate circuits in factory and industrial settings.
A red emergency stop button that mounts on control panels and requires a twisting motion to release; used to quickly shut down machinery and equipment in industrial settings.
A 16-position rotary selector switch that mounts directly onto circuit boards and lets operators choose between different settings or modes in electrical equipment.