A red push button switch in a grey plastic box that springs back when released, used to control machinery and equipment on industrial sites.
A mounting adapter that connects illuminated push buttons to electrical panels and control systems, allowing secure installation and proper contact alignment.
A waterproof emergency stop push button that mounts on the surface of machinery or control panels to safely shut down equipment in emergencies.
A connector adapter that attaches push buttons to JL and JM series switch systems for industrial control panels and machinery.
A Siemens push button extension plunger that lengthens the reach of standard push button switches for easier operation on control panels and machinery.
A rugged dual push button control switch with red and green buttons for starting and stopping machinery, protected against dust and water spray in harsh industrial environments.
A red illuminated emergency stop button with twist-release action that mounts into a 22mm panel cutout and works safely in wet and dusty environments.
A metal mounting frame that holds Nidec DP4 and DPL4 push button switches in place on control panels and machinery.
A push button electrical switch with a rectangular button for controlling circuits in machinery and control panels, rated for low voltage applications.
A rugged green push button switch in a metal enclosure, designed for wet and dusty industrial environments where equipment needs protection from water and dirt.
A green push button switch that mounts directly onto control panels to start, stop, or activate machinery and equipment.
A red push button switch that mounts directly onto a control panel to start, stop, or control industrial machinery and equipment.
A red emergency stop button that mounts on control panels to instantly shut down machinery; twist the button to release it after pressing.
A metal locking ring that secures Omron A22N push buttons firmly into control panel holes, preventing loosening from vibration or handling.
A hex nut fastener for securing Schurter push button switches to control panels and equipment.
A small rectangular push button switch with 16mm diameter that mounts on control panels and electronic boards to turn circuits on and off.
A rugged green push button switch in a sealed enclosure rated for wet and dusty environments, commonly used to start or stop machinery on industrial sites.
A push button adapter that connects Suregrip JL and JM series push buttons to control panels and machinery.
A green push button in a grey plastic weatherproof enclosure for starting or stopping machinery and equipment on wet or dusty job sites.
A rugged enclosed push button switch with spring return action, rated for harsh outdoor and wet environments, commonly used to control machinery and equipment on industrial sites.
A replacement double-action button head for Eaton RMQ Titan push buttons used in industrial control panels and machinery to activate or stop processes.
A Legrand push button adapter block that connects non-illuminated push button heads to electrical control systems using screw terminals.
A plastic push button adapter that works with control and signalling units, featuring a spring return mechanism for reliable operation in industrial and commercial electrical panels.
A panel-mounted push button switch with dual throw contacts for controlling electrical circuits in industrial machinery and control panels.
A protective and mounting bezel ring for EAO 56 Series push buttons, used to finish and secure buttons on industrial control panels.
A small waterproof push button switch rated IP67 that activates momentarily when pressed, used in control panels and industrial equipment operating on 24V DC power.
A replacement lens component for EAO 31 Series push button switches, used in control panels and machinery interfaces.
A red illuminated emergency stop button that mounts on control panels and stops machinery when pressed; requires twisting to reset.
A weather-resistant push button control station with three contact switches inside a black polypropylene box, used to start and stop industrial machinery and equipment.
A yellow emergency stop button that mounts on machine control panels and requires a twist to release after being pressed; used to safely stop machinery in an emergency.
A weatherproof push button control switch with spring return action, available in black, red, and white, designed for outdoor and wet industrial environments.
A rugged two-button control station with green and red metal buttons in a waterproof aluminium box, used to start and stop industrial machines and equipment.
An electrical adapter that connects Idec HW series push buttons and switches to control panels and machinery, allowing operators to start, stop, or control equipment safely.
A black illuminated push button switch actuator that mounts on control panels and works with EAO Series 71 switches for electrical machinery operation.
A protective surround ring for ABB INCA push buttons used in control panels and electrical installations.
A red industrial push button switch with weatherproof enclosure for emergency stop and control functions in wet, dusty, or high-pressure wash environments.
An illuminated push button switch that mounts on control panels and works with EAO Series 31, rated for 250V AC and temperatures from -25°C to +55°C.
A metal hex nut designed to secure Schurter push button switches into control panels and equipment enclosures.
A black illuminated push button that mounts on control panel doors and equipment faces, designed for use with EAO Series 51 electrical switches.
A rugged weatherproof push button control station with green, red, and white buttons, sealed to IP66/IP67/IP69 for outdoor and wet industrial environments.