A tough, waterproof compact digital camera with 12 megapixel resolution and 4K video capability, designed for field work and outdoor use in harsh conditions.
A waterproof red push button switch that works reliably in hot and cold conditions, designed to be mounted on control panels and withstand harsh industrial environments.
A small clear indicator light bulb that fits in control panels and equipment, rated for 230V power, designed to show when machines are running or in a specific state.
An illuminated 2-position selector switch with a white handle that locks in place, designed for industrial control panels and machinery operating in wet or dusty environments.
Black screw-clamp terminal block for DIN rails with built-in 6.3A fuse protection, designed for industrial electrical panels and control circuits.
A weatherproof plastic enclosure designed to mount a single 22mm push button switch on control panels and equipment, protecting the button from dust and water spray.
A stylish, energy-efficient 8W LED decorative bulb with a rustic long filament design that fits standard E27 sockets and lasts a long time.
A white electrical switch mechanism rated for 10 amps, designed as a replacement module for Schneider Electric Odace-series wall installations in homes and offices.
An 18-watt OSRAM LED bulb with standard E27 screw fitting that produces warm white light and is designed for everyday household and commercial lighting.
A waterproof two-direction joystick controller with a knob handle, designed for industrial machines and equipment that need precise manual positioning in wet or dusty environments.
A two-tier electrical connector block that mounts on standard DIN rails in control panels, designed to safely connect and organize industrial wiring up to 25 amps.
A green-handled electrical selector switch with two positions and light indication, designed to fit standard 30mm panel cutouts for industrial machinery and equipment control.
A small white push-button switch for electronic control panels and device keypads, rated for 50 mA at 12 volts with a compact surface-mount design.
A standard metal rocker light switch from Siemens rated for 10 amps at 250 volts, designed to be mounted flush in walls for home and office lighting control.
A 60-watt waterproof LED light strip, 1.8 meters long, designed for wet and damp areas like bathrooms, factories, and storage rooms.
A modular switch body component designed to work with APEM A01 series push button switches for controlling electrical circuits in industrial equipment and control panels.
A grey metal control station enclosure with three push button openings, designed to house and protect industrial command buttons in harsh outdoor and wet environments.
Industrial emergency stop button with a red mushroom head that requires a turning motion to release, designed to work in wet and dusty environments on factory floors and machinery.
A compact LED lighting kit designed to attach to DJI Mavic 2 Pro drones, enabling better video and photo quality in low-light conditions.
Orange electrical connector block that mounts on DIN rail in control panels, designed for quick spring clamp wire connections up to 2.5mm cable size.
A heavy-duty 3-position key-operated selector switch for industrial control panels, designed for wet and dusty environments on construction sites and manufacturing facilities.
A three-position illuminated selector switch with a white handle and 30mm mounting hole, designed for industrial control panels and machinery operation in wet and dusty environments.
Heavy-duty industrial push button control station with twist-release mechanism, designed for wet and dusty environments with high protection against water and dust ingress.
A compact LED light designed to fit inside electrical cabinets and control panels, runs on any voltage between 110 and 240V, and produces bright daylight-like illumination.
A three-position illuminated selector switch designed for industrial control panels, with a 22mm mounting hole and waterproof ratings suitable for harsh factory and outdoor environments.
Red emergency stop push button for industrial control panels that cuts power immediately when pulled; designed for wet, dusty, and high-pressure wash environments.
A rugged illuminated 3-position selector switch with a 22mm mounting hole, designed for harsh industrial environments and rated for dust and high-pressure water jets.
A white electrical connector block with 13 connection points, rated for 32 amps at 450 volts, designed for power distribution in control panels and industrial machines.
A rugged industrial foot switch with aluminium casing and slow action operation, designed for heavy-duty factory and hazardous environments where hands-free control is needed.
A rugged foot-operated control switch with aluminium casing and guard cover, designed for heavy industrial machinery and hazardous environments where hands-free operation is needed.
A rugged grey plastic enclosure that houses two control buttons or switches, designed to protect electrical equipment in harsh outdoor and wet environments on industrial sites.
A red emergency stop push button that mounts on control panel cutouts, with twist release design and high water/dust protection for industrial machinery safety.
A compact 24-volt DC power socket that mounts directly onto circuit boards, rated for 5 amps, with a right-angle design to save space.
A safety ground terminal block designed for dangerous areas like oil rigs and chemical plants, using push-in connection and certified by ATEX and IECEx standards.
A rugged plastic push button control station with dual contact options, designed for wet and dusty industrial environments with maximum protection against water and dust ingress.
A grey electrical connector block that plugs onto DIN rail tracks, designed for safely connecting industrial wires up to 4mm thick with 24-amp capacity.
Light grey indoor electrical outlet for standard North American plugs, rated for 6.3 amps, designed for mounting on DIN rails in electrical boxes.
A red metal emergency stop push button that mounts on control panels and requires a key to reset after activation, designed for harsh wet and dusty industrial environments.
A white rocker switch module that controls lights or circuits in two directions, designed to fit into modern Schneider Unica electrical wiring systems for homes and offices.
A rugged 2-position key-operated selector switch for controlling machinery and equipment, designed to stay in place once turned and fit into standard 22mm panel openings.