A white LED indicator light that mounts on control panels to show equipment status, rated for 24V power and sealed against dust and water spray.
An orange LED indicator light that mounts flush on control panels to show equipment status, rated for wet and dusty environments, powered by 24V.
A red LED indicator light that mounts flush on control panels to show equipment status or alarm conditions, operating on low DC voltage.
Black plastic rectangular end cap for 45x90mm strut profiles.
A white LED indicator light that mounts on control panels to show machine status or power state, rated for 120V operation with dust and water protection.
A yellow LED indicator light that shows equipment status or system activity, powered by 24V and commonly used on control panels and machinery in industrial settings.
A yellow LED indicator light that mounts into a 22mm hole in control panels to show machine status or operational state, rated for indoor and outdoor wet conditions.
A green LED indicator light that mounts in a 30mm hole and shows machine status in wet or dusty industrial environments, powered by standard AC wall voltage.
A red LED indicator light that mounts on standard DIN rail to show machine or system status in control panels, rated for 230V AC power.
A yellow LED indicator light that shows equipment status or operational state in industrial control panels, rated for 48V power supply.
An orange LED indicator light that mounts flush into a 22mm panel hole and runs on 110V AC power to show machine status or warnings.
Small clear indicator light bulb for industrial control panels and machinery, rated for 220–260V supply.
A yellow indicator light that mounts on control panels to show equipment status, rated for wet and harsh industrial environments.
A small, clear indicator light bulb for control panels and machinery that runs on 14 volts and lasts 5000 hours.
A red LED indicator light that mounts into control panel holes to show equipment status or alarm conditions, rated for wet environments.
A white LED indicator light that mounts on industrial control panels to show machine status or equipment operation, rated for wet and dusty environments.
A white LED indicator light that mounts on control panels to show equipment status, powered by 110V electricity.
A waterproof indicator light that mounts on control panels to show when machinery or equipment is running or in a specific state, operating at 48 volts.
A waterproof LED indicator light that mounts on control panels to show equipment status, designed for wet and harsh industrial environments.
A red panel-mounted indicator light that shows when equipment is running or an alarm is active, powered by standard 230V mains electricity.
A green LED indicator light that mounts on control panels to show when equipment is running or ready, rated for wet and dusty environments.
A small clear indicator light for 12-volt equipment panels that lights up to show status and runs for 3000 hours before needing replacement.
A small clear indicator light bulb for low-voltage battery-powered devices like flashlights and medical equipment, with a 15-hour lifespan.
Rectangular neodymium block magnet for industrial assembly and holding applications.
A waterproof indicator light that shows whether equipment is on or off, rated for 48 volts and suitable for wet or dusty work environments.
An orange LED indicator light that mounts on industrial control panels to show equipment status, sealed against dust and water spray.
A waterproof LED indicator light that mounts on industrial control panels to show equipment status, rated for three-phase power systems.
A white LED indicator light that mounts flush on control panel doors to show equipment status or operational state, rated for wet and dusty environments.
A blue LED indicator light that mounts flush into a 30mm hole on control panels and machinery to show status, powered by 100–132V AC electricity.
A white LED indicator light that mounts on machine control panels to show status and signal operations at 110V.
A clear indicator light bulb that fits flashlights and equipment panels, using 7.2 volts and lasting about 15 hours.
A red LED indicator light that mounts on control panels to show alarm status or equipment state, powered by 24V.
A green LED indicator light that mounts on control panels to show equipment status or alarm conditions, powered by 24 volts.
A bright, thin rectangular LED panel light that uses 38 watts and fits modern office and commercial spaces.
A rugged red LED indicator light that mounts on control panels to show equipment status, sealed against dust and water spray for outdoor and wet industrial areas.
A red indicator light for industrial control panels that shows when equipment is running or active, sealed against water and dust.
A blue LED indicator light that mounts on electrical control panels to show equipment status or operation, rated for wet and dusty environments.
A yellow LED indicator light that mounts on control panels to show equipment status, sealed against dust and water for harsh industrial environments.
A small clear indicator light bulb that runs on 36 volts and shows equipment status on control panels.
A red indicator light head that mounts in a 22mm panel opening to show equipment status or operational state in industrial control panels.