A plastic control station enclosure from Eaton's Moeller range that houses pushbuttons, switches and control components on industrial machinery and production lines.
A red-topped momentary pushbutton switch for control panels and electronic equipment that handles 50 mA at 12 volts with a 9.5 mm stem.
Non-flush inductive safety switch for industrial machine guard detection and protection.
Static-safe flush-cut side cutters for clean cutting in electronics manufacturing.
A small black pushbutton switch used in control panels, keyboards, and electronic devices that activates only while pressed.
Black latching pushbutton with one normally-open contact for control.
Red spring-return pushbutton with normally-closed contact for control.
A gold-colored single light switch that mounts flush into standard walls and controls one light from one location.
A small waterproof pushbutton switch for electronic equipment that can handle wet or dusty environments and momentary contact operations.
A waterproof pushbutton switch with a glowing indicator light that connects to 24V electrical circuits in industrial control panels and equipment.
A blue momentary pushbutton switch rated IP54 for dusty or damp environments, commonly used in control panels and equipment interfaces.
A grey weather-resistant electrical control box designed to hold up to 5 pushbutton switches or indicators in industrial machinery and outdoor installations.
Mechanical pushbutton code lock with knob handle for entry doors in commercial buildings.
A small black pushbutton switch used in keyboards, control panels, and electronic devices to turn circuits on and off.
A red momentary tactile pushbutton switch for electronic devices and control panels, rated for 50mA with through-hole mounting.
Water-saving dual flush toilet tank for standard and low-flow installations.
A waterproof pushbutton switch with a lighted cap that stays momentary and handles 50 mA at 24 volts, used in control panels and machine interfaces where dust and moisture are present.
A flush-mounting adapter that connects ABB CombiLine push buttons to electrical panels and control boxes.
A small red pushbutton switch for electronic control panels and devices, rated for 24V DC operation with a light 50 mA current draw.
ESD side cutters with full flush cut for electronics component trimming work.
A green LED pilot light that mounts flush into a 30mm hole on control panels to show when equipment is running or a circuit is live, powered by AC voltage.
A protective decorative ring that surrounds an illuminated push button switch to provide waterproof protection in wet or dusty environments.
Padlockable flap guard for 22mm Schneider push buttons.
A stainless steel hex nut designed to secure Schurter push button switches to control panels and electrical enclosures.
A red illuminated emergency stop button that mounts on control panels to safely shut down machinery; it has a twist-release design to prevent accidental reactivation.
A replacement push button actuator for EAO Series 14 modular switches used in industrial control panels and machinery interfaces.
Insulation monitoring relay that continuously checks for insulation faults in electrical installations.
Three-port wall-mounted faceplate for organizing network connections in offices.
2-port white wall faceplate for mounting network and telephone jacks.
Single-port wall faceplate for keystone modules in network installations.
A 16-position rotary switch that clips onto circuit boards to configure electrical equipment settings and controls.
A 16-position rotary selector switch that mounts directly onto circuit boards for equipment configuration and control.
A 10-position rotary switch that mounts through circuit board holes and lets you configure settings on industrial control equipment.
4-port wall faceplate for keystone modules and outlet installations.