Dust particle sensor for air quality monitoring in HVAC and industrial systems.
Safety crosspiece that prevents electrical floor boxes or equipment from tipping over when mounted to the ground.
24V brushed DC motor with spur gearbox for automation and machinery control applications.
Medium-power 24V brushed DC motor with spur gearbox for automation systems.
Small 14W brushed DC geared motor for automation and mechanical drive applications.
Small 24V brushed DC motor with gearbox for light automation and control applications.
Small 12V brushed DC geared motor for low-speed automation and control applications.
Self-adhesive pads for attaching welded tip thermocouples to surfaces for temperature monitoring.
A bright, long-lasting professional light bulb for shops, museums, and building displays that produces sharp white light and lasts for 12,000 hours.
A bright professional 50-watt bulb that produces sharp white light, lasts a long time, and is very efficient for use in studios, warehouses, and large commercial spaces.
Three-pole 80-amp compact circuit breaker for electrical panel and network protection.
A high-quality, bright white professional light bulb that stays white and lasts a long time.
Protective edge beading for cable trunking to prevent wire damage and sharp edges.
A vertical tilt switch that detects when equipment tilts or changes angle, used to trigger alarms or stop machinery when something tips over.
A small electrical switch that detects when equipment tilts 15° from horizontal and triggers an electrical circuit, commonly used to stop machinery when it tips.
A small tilt and position sensor that detects when equipment tilts between 25 and 60 degrees, commonly used to trigger alarms or stop machinery if something tips over.
A small tilt switch that detects when equipment tilts between 50 and 80 degrees from horizontal, commonly used in machinery to trigger alarms or stop operations when something tips.
A small tilt sensor that detects when equipment tilts 15 degrees from horizontal and triggers a switch at 24 volts, commonly used to monitor equipment position or prevent tipping.
A small electrical switch that detects when equipment tilts 10 degrees from horizontal and triggers an alarm or control signal, commonly used to prevent tip-over or monitor tank/vessel angle.
A small tilt switch that detects when equipment tilts 35 degrees in any direction, commonly used to trigger alarms or shut down machinery on construction sites and industrial equipment.
A small electronic tilt switch that detects when equipment tilts 15 degrees and signals an electrical system to stop or alarm, commonly used on cranes, machinery, and vehicles for safety.
Compact fire-resistant cable chain for tight-radius bending in industrial machinery.
Nozzle-tip thermocouple for precise temperature measurement in injection or spray equipment.
Black EPDM edge protection strip for securing and protecting sharp edges.
A bright, long-lasting professional bulb for shops, stadiums, and display lighting that produces sharp white light.
A safe, shatterproof ultraviolet light that kills flying insects in food preparation and commercial areas without breaking into sharp pieces.