Safety crosspiece that prevents electrical floor boxes or equipment from tipping over when mounted to the ground.
24V brushed DC motor with spur gearbox for automation and machinery control applications.
Small 14W brushed DC geared motor for automation and mechanical drive applications.
Medium-power 24V brushed DC motor with spur gearbox for automation systems.
Small 24V brushed DC motor with gearbox for light automation and control applications.
Small 12V brushed DC geared motor for low-speed automation and control applications.
Self-adhesive pads for attaching welded tip thermocouples to surfaces for temperature monitoring.
Three-pole 80-amp compact circuit breaker for electrical panel and network protection.
A vertical tilt switch that detects when equipment tilts or changes angle, used to trigger alarms or stop machinery when something tips over.
A small electrical switch that detects when equipment tilts 15° from horizontal and triggers an electrical circuit, commonly used to stop machinery when it tips.
A small tilt and position sensor that detects when equipment tilts between 25 and 60 degrees, commonly used to trigger alarms or stop machinery if something tips over.
A small tilt switch that detects when equipment tilts between 50 and 80 degrees from horizontal, commonly used in machinery to trigger alarms or stop operations when something tips.
A small tilt sensor that detects when equipment tilts 15 degrees from horizontal and triggers a switch at 24 volts, commonly used to monitor equipment position or prevent tipping.
A small electrical switch that detects when equipment tilts 10 degrees from horizontal and triggers an alarm or control signal, commonly used to prevent tip-over or monitor tank/vessel angle.
A small electronic tilt switch that detects when equipment tilts 15 degrees and signals an electrical system to stop or alarm, commonly used on cranes, machinery, and vehicles for safety.
A small tilt switch that detects when equipment tilts 35 degrees in any direction, commonly used to trigger alarms or shut down machinery on construction sites and industrial equipment.
Nozzle-tip thermocouple for precise temperature measurement in injection or spray equipment.