A heavy-duty plunger limit switch that detects when machinery reaches a set position and sends an electrical signal to stop or control equipment movement.
A 10-position rotary pushwheel switch that lets operators manually select settings on industrial equipment panels using a push-and-turn mechanism.
A small 3-position switch that mounts directly into circuit boards, allowing operators to set different configurations using a raised toggle lever.
A small rotary selector switch that mounts directly onto circuit boards and lets you set 16 different configuration positions for industrial equipment.
A 4-position selector switch that mounts directly into circuit boards to configure equipment settings, rated for low-voltage industrial control applications.
A waterproof industrial limit switch with a roller lever that detects when machinery reaches a set position and triggers control actions, rated for 10 amps.
A 10-position rotary selector switch that mounts directly onto circuit boards and helps configure settings in industrial equipment at 24 volts.
A durable metal limit switch with spring lever that detects equipment position and stops machinery at set points, used in factories and production lines.
A small indicator light that shows the status of machinery or equipment in control panels, used in factories and industrial settings to signal when systems are running or in alarm.
A green-handled selector switch with two positions and built-in illumination, designed for industrial control panels where operators need to toggle between two settings.
A weatherproof 2-position selector switch with a 30mm mounting hole that latches in place when you turn it, commonly used to control equipment on and off in industrial settings.
A 10-position rotary switch that mounts flat on circuit boards and is adjusted with a screwdriver, commonly used for device configuration and settings in industrial equipment.
A rugged Siemens position sensor with a lever arm that triggers when machinery reaches a set point, fully sealed against dust and water for factory floors.
A small rotary switch with 4 positions that mounts directly onto circuit boards and handles up to 100mA at 30 volts for equipment control settings.
A wall-mounted white TV satellite socket that lets you connect one satellite dish signal to multiple television sets throughout a building.
A durable red-lit touch button switch that works in wet conditions and can be set to stay on or turn off when released, operating between 5V and 24V.
A red emergency stop button with twist-release mechanism that mounts into a 22mm panel hole to safely shut down machinery and equipment in industrial settings.
A white wall-mounted light switch with a built-in timer that automatically turns lights off after a set time, rated for 10 amps at 240 volts.
An Omron plunger limit switch that detects when machinery or moving parts reach a set position and triggers an electrical signal to stop or control the machine.
A 16-position manual pushwheel switch for control panels that lets operators select settings from 0-9 and A-F using a rotating dial.
An Omron plunger limit switch that detects when machinery or equipment reaches a specific position, used to control motors and stop equipment at set points.
A rugged industrial limit switch that detects when machinery or equipment reaches a set position, with weatherproof plastic housing suitable for wet and dusty environments.
A roller lever head that attaches to Eaton limit switches to detect when machinery or moving parts reach a set position and trigger electrical controls.
A heavy-duty key-operated selector switch with 3 positions and automatic spring return, used to control machinery and equipment in industrial settings.
Hands-free LED head torch powered by AA batteries, perfect for work in dark areas with adjustable fit and three brightness settings.
An 8-position electrical switch that mounts directly onto circuit boards to configure equipment settings, commonly used in industrial control systems.
A 9-position Omron DIP switch with piano-style buttons that plugs directly into circuit boards for controlling electronic equipment in industrial settings.
A two-position selector switch head that lets operators choose between two settings on machinery or control panels, with protection against dust and water spray.
A three-position manual selector switch head that lets operators choose between three different settings or modes on industrial equipment and control panels.
A red emergency stop push button with twist-release mechanism for mounting on control panels, designed to safely shut down machinery in industrial settings.
A 16-position rotary selector switch that mounts flat on circuit boards to set equipment configurations, rated for industrial use up to 24 volts.
A small 32-position switch that mounts directly onto circuit boards for setting equipment configurations, with gold-plated contacts for reliable operation.
A rugged metal limit switch with plunger activation that detects when machinery reaches a set position, suitable for wet or dusty factory and outdoor environments.
A rugged foot-operated electrical switch that activates when pressed and releases when lifted, used to control machinery and equipment hands-free in industrial settings.