A 10-position electronic switch that you mount on circuit boards to configure equipment settings, rated for industrial use up to 24V.
A small three-position slide switch that mounts directly on circuit boards to control or configure industrial equipment settings.
A 15-slot electrical block that distributes power safely between thick cables at high current and voltage in industrial settings.
A weatherproof metal limit switch with a round plunger that detects when machinery reaches a set position and sends a control signal.
A small four-position electrical switch that mounts directly on circuit boards to control settings in industrial equipment and machinery.
A small 4-position slide switch that mounts directly into circuit boards to control settings and configuration in industrial equipment.
A small rotary selector switch that plugs into circuit boards and lets you choose from 16 different settings using a dial.
A rotary joystick switch that lets operators select different settings on industrial equipment by turning and clicking into different positions.
An 8-position slide switch that mounts directly onto circuit boards for controlling electronic equipment settings and configurations.
A 10-position switch that mounts directly onto circuit boards and lets you configure settings by flipping individual switches up or down.
A rugged metal limit switch that detects when moving machinery reaches a set position, rated for dusty and wet environments.
A red illuminated emergency stop button that mounts on control panels to safely shut down machinery and equipment in industrial settings.
A small 4-position slide switch that mounts directly onto circuit boards for controlling device settings or configurations.
A 12-position electrical switch that mounts on circuit boards and is used to configure device settings with a simple sliding action.
A small 2-position electrical switch that mounts flat on circuit boards and uses a lever to toggle between two settings.
A portable rechargeable work light with two brightness settings that you can charge up and use at construction sites or for repair work.
A 6-position surface-mounted electronic switch that lets you configure settings on circuit boards by sliding individual switches on or off.
A small slide switch that mounts on circuit boards to configure electronic equipment settings, with 4 independent switch positions.
A 16-position electrical switch that mounts flat on circuit boards and is adjusted with a screwdriver, used for configuring equipment settings.
A 4-position switch that mounts flat on circuit boards to configure equipment settings or enable different electrical circuits.
A 10-position slide switch that mounts flat on circuit boards to configure settings in industrial control systems and equipment.
A two-position key-operated switch head for controlling machinery and equipment on/off or between two operating modes in industrial settings.
A replacement operating head for Honeywell limit switches that detects when machinery reaches a set position and triggers an electrical signal.
A rugged waterproof limit switch with a roller lever that detects when moving machinery or gates reach a set position and stops or reverses them.
A 10-position electrical switch that mounts directly onto circuit boards and lets operators configure industrial equipment settings.
A rugged waterproof touch switch that stays in the position you set it, glows when activated, and resists moisture and dust in demanding industrial environments.
A 10-position switch that slides to configure electronics and control systems, commonly used in industrial equipment to set operating parameters.
A small two-position electrical switch that mounts directly onto circuit boards for selecting settings or configurations in electronic equipment.
A small 4-position switch that mounts flat on circuit boards to configure equipment settings, with reliable piano-key buttons.
A small 3-position slide switch that mounts directly onto circuit boards for controlling electrical settings in industrial equipment.
A 2-position illuminated selector switch with a green handle that mounts in a 22.5mm panel cutout and stays in the position you set it to.
A two-position key switch that stays in the selected position until manually changed, used to control machinery and equipment in industrial settings.
A 16-position rotary switch that mounts flat on circuit boards to configure settings in industrial control equipment and electronic devices.
A 6-position Omron DIP switch with piano-style keys that plugs directly into circuit boards to configure equipment settings.