A USB joystick interface adapter that connects joystick controls to machines and systems, commonly used in industrial equipment and vehicle controls.
A small wall-mounted electrical interface unit that controls lights and devices at voltages between 110V and 230V.
A standard wall-mounted electrical switch unit that controls lighting and small appliances up to 6 amps at 230 volts, suitable for homes and offices.
USB front interface module for Siemens SENTRON switch monitoring and control.
An APEM capacitive touch switch that responds to touch without requiring physical contact, ideal for industrial control panels and machinery.
A compact Finder wall-mounted light switch interface unit rated for 230V and 6A, suitable for standard domestic electrical installations.
EAO dual normally open contact block for human machine interface applications.
A safety-rated single push button switch with optical touch sensing, mounted on a control panel to safely operate industrial machinery.
A rugged industrial push button with built-in safety checking that prevents accidental machine activation, used on control panels in factories and construction sites.
A touch-activated switch with color-changing light that works underwater or in wet areas, outputs a signal for industrial equipment control.
A waterproof, illuminated touch switch that activates when pressed and is safe for wet or dusty industrial environments.
A water and dust-proof touch-sensitive switch from Omron that works reliably in wet or dirty industrial environments.
A touch-activated switch with a colored light that momentarily activates when pressed, designed for industrial control panels and machinery.
A rugged waterproof touch switch that stays in the position you set it, glows when activated, and resists moisture and dust in demanding industrial environments.
A waterproof touch-activated switch with built-in light that works in wet or dusty environments and comes in stainless steel for clean facilities.
A touch-activated switch with colored light indicators that latches in position and works with 6-24V electrical systems for machinery and control panels.
A touch-activated electrical switch with a coloured light indicator that stays on or off when pressed, powered by 6–24V DC and ideal for industrial control panels.
A waterproof touch-activated red switch with built-in light that stays on until released, rated for industrial use with 12-24V power.
A waterproof touch-activated button with red light indicator that turns on momentarily when pressed, rated for wet and dusty industrial environments.
A waterproof, touch-activated switch with a built-in light that stays on when pressed, made from stainless steel and suitable for wet, dusty, or food production environments.
A waterproof touch button with green and red lights that stays on until pressed again, suitable for wet industrial environments.
A waterproof touch-activated switch with a light that stays on or off once pressed, suitable for wet and dusty industrial environments.
A waterproof touch-activated button switch that lights up when used, suitable for wet industrial environments and powered by 12-24V electricity.
A waterproof push-button switch that detects touch and works reliably in hot, cold and wet conditions for industrial equipment control.
A waterproof touch-sensitive switch with a built-in light that works from 12V to 24V power, ideal for outdoor or wet industrial equipment.
A yellow safety push button with optical touch sensing for controlling industrial machinery, resistant to dust and water spray.
Black plastic bezel ring that fits around EAO Series 04 push buttons on control panels and machinery interfaces to provide a professional finish and mounting frame.
A soft-grip pendant switch for controlling electrical equipment remotely, commonly used on cranes and lifting machinery.
A replacement pushbutton actuator component designed to work with illuminated pushbutton switches for controlling machines and equipment on industrial control panels.
A push button actuator that works with EAO Series 03 modular switches to provide manual control points on industrial control panels and machinery.
A touch-activated electrical switch that stays on until touched again, using low 5V power and suitable for industrial control panels and equipment.
A replacement symbol cap for EAO 09 Series industrial keypads that snaps onto keypad buttons to label or replace worn markings.
A red-lit touch button switch that activates when touched and releases when you let go, outputting a signal to control machinery or equipment.
A waterproof touch button with colored lights that can turn on/stay on or just respond to touch, used to control machines and equipment.
A durable waterproof touch-activated switch with built-in light that stays pressed until touched again, designed for harsh industrial environments and powered by 12-24 volts.
A touch-activated switch that turns equipment on and off without physical buttons, powered by 12 volts.
A red-lit capacitive touch switch that activates momentarily when touched, ideal for control panels and industrial machinery operating on 24V power.
A touch-sensitive electrical switch that responds to finger contact and sends a signal to control machines or equipment.
A waterproof red touch switch with built-in light that activates on contact, suitable for wet or dirty factory environments.
A touch-activated illuminated switch that responds to finger proximity without mechanical contact, available in blue, green or red LED colors for industrial control panels.