A black single-way switch insert module rated for 6 amps that fits into Legrand Mosaic series switch frames to control lights and basic electrical loads.
A white rocker switch insert module rated for 10 amps that fits into Legrand Mosaic switch frames for home and office lighting control.
A Siemens mounting holder that secures three push button modules together in control panels and electrical enclosures.
A hex nut accessory that secures Nidec miniature pushbutton switches (SPP and S2P models) to panel or enclosure mounting surfaces.
A small light indicator module for Legrand Mosaic series switches that lights up to show when the switch is on, using 3mA at 230V.
A 10-position rotary switch that mounts flat on circuit boards for selecting different electrical settings or modes in industrial equipment.
A replacement lens cover for RAFI 1.25-module push buttons used in control panels and machinery operator interfaces.
A 10-position rotary selector switch that tells equipment which mode or setting to use, mounted directly into circuit boards.
A white 2-way light switch insert that controls lights from two different locations, rated for 20 amps at 250 volts.
A small rotary switch component that lets you set 16 different configuration codes on control boards and industrial equipment.
Schneider Electric I/O module for TransferPacT switch disconnectors at 30V operation.
A metal mounting frame that holds Nidec DP4 and DPL4 push button switches in place on control panels and machinery.
Black tactile switch cap for Controlmec control modules, used to replace worn or damaged switch tops on industrial control panels and equipment.
A single white switch module rated for 10 amps that fits into Alfanar series switch grids for controlling lights and basic electrical loads.
A 10-amp electrical switch insert module that fits into Legrand Mosaic wall plates for controlling lights and appliances.
A replacement lens for RAFI 1-module push button switches used in control panels and machinery interfaces.
Rocker switch from industrial-grade 8 switch product series.
A replacement lens cover for RAFI 2-module push button switches used in industrial control panels and machinery operator interfaces.
A replacement lens cover for RAFI 1.5-module push button switches used on industrial control panels and machinery.
A small rotary selector switch with 16 positions used to configure settings in industrial control panels and electronic equipment.
A small rotary switch with 16 positions that lets you set codes on equipment control boards, commonly used in industrial devices and control panels.
A 10-amp switch insert module from ABB for replacing or upgrading light switches in homes and offices.
A protective cover for Telemecanique limit switch indicator modules that shields the display and electronics from dust and damage on factory floors and machinery.
A small rotary switch that mounts directly on circuit boards and lets you select from 16 different settings for industrial equipment configuration.
A small rotary switch with 16 positions used to configure settings in industrial control equipment and devices.
A small rotating switch with 16 positions that lets you set codes on industrial equipment panels or control boxes.
A compact rotary switch that mounts flat on circuit boards and lets you select between 10 different settings using binary code signals.
A small rotary switch that lets you set different electronic equipment configurations by rotating and selecting one of four positions.
A small rotary coded switch that mounts directly on circuit boards and lets you set different electrical configurations by turning the dial to 16 different positions.
A replacement switch insert module for Legrand Mosaic wall socket systems that controls lights or outlets up to 10 amps.
A white single-way light switch module rated for 10 amps that fits into standard wall switch plates for homes and offices.
Push button cap for Nidec SPC103 push button switches.
Replacement lever actuator for Nidec 8H Series rocker switches.
A small electrical switch with two positions that mounts directly on circuit boards, commonly used to configure settings in industrial equipment and control systems.