A replacement backspace symbol cap for EAO 09 Series keypads used in industrial control panels and machinery operators.
A key-operated electrical switch head used to control machinery and equipment in industrial settings, where you turn a key to select different operating modes.
A red push button actuator that fits EAO Series 14 modular switches, used to activate electrical circuits in control panels and machinery.
A modular bezel ring that fits around push button switches in control panels and machinery, used to mount and finish the switch opening.
An illuminated 2-position selector switch for controlling machinery and equipment on factory floors and job sites.
A green-handled 3-position illuminated selector switch for industrial control panels that allows operators to choose between three different operating modes.
A two-position key-operated switch that stays in the selected position until manually turned to another position, commonly used for equipment start/stop and mode selection on industrial control panels.
A replacement cap for EAO 09 Series keypads with a parking aid symbol, used to label and identify control buttons on industrial panels and equipment.
A illuminated 3-position selector switch with a white handle for mounting in 30mm panel cutouts, commonly used on industrial machines and control panels to select between operating modes.
A rugged three-position key-operated selector switch with weatherproof rating for outdoor and harsh industrial control panels.
A key-operated switch head from Eaton that lets you control electrical equipment and machinery by turning a key, commonly used in control panels and equipment access.
A two-way joystick lever switch for controlling equipment direction and position in industrial machines and control panels.
White replacement key cap for Omron tactile push-button switches used in control panels, keyboards, and industrial equipment.
A small illuminated key switch with two positions, used to control equipment start/stop or mode selection on industrial control panels.
An illuminated three-position selector switch with a black and yellow handle for mounting on industrial control panels, commonly used to select between operating modes on machinery.
A grey replacement cap for MEC 5G Series tactile switches, used in keyboards and control panels to provide tactile feedback when pressed.
A decorative and protective bezel ring that mounts around EAO Series 14 push button switches on control panels and machinery.
A compact manual 2-position selector switch that mounts in a 22mm hole on control panels to select between two operating modes.
A two-position manual selector switch head that lets operators choose between two settings on control panels and machinery.
An illuminated three-position selector switch with a 22mm cutout for industrial machinery and control panels; commonly used on production equipment and site machinery to start, stop, and select functions.
A rugged waterproof pushbutton switch with illuminated green and red options, designed for industrial control panels and equipment that need reliable button input in wet or dusty environments.
A rugged 4-way joystick control switch with sealed waterproof design, used for remote operation of heavy equipment and machinery in tough outdoor and industrial environments.
A grey aluminium enclosure for mounting push buttons and control switches on industrial machinery and control panels.
A two-position key switch with spring return for controlling industrial equipment and machinery, installed in 30mm panel cutouts.
An industrial selector switch with a black handle that mounts on control panels and is protected against water and dust spray.
A black illuminated push button actuator for control panels that lights up when pressed, designed to work with EAO Series 61 switches in factories, machines, and industrial equipment.
An illuminated two-position selector switch with a 22mm panel cutout for controlling electrical equipment or selecting between operating modes on machinery.
A three-position rotary selector switch head that lets operators manually choose between three different settings or modes on industrial machines and control panels.
A key-operated switch head from Eaton that mounts on control panels to start, stop, or select equipment modes using a standard Ronis key.
A rugged orange three-position illuminated selector switch for industrial control panels that springs back to centre and resists dust and water.
A small push-button switch for low-power electronics that makes contact when pressed, commonly used in control panels and device keypads.
A sealed 3-axis joystick knob with waterproof protection for controlling machinery and equipment in wet or dusty industrial environments.
A grey plastic enclosure box with one 22.3mm hole for mounting a single push button or control switch on industrial machinery and equipment.
A 2-position manual selector switch head made by Idec that lets operators choose between two different control settings in industrial equipment and machinery.
A 2-position Schneider Electric selector switch used to manually select between two operating modes in industrial machines and control panels.
A 22mm industrial selector switch with a black handle for choosing between two positions; commonly mounted on control panels to switch machinery or processes on and off.
A replacement symbol cap for EAO industrial keypads that displays a cooling or air conditioning symbol, used on control panels to identify HVAC function buttons.
A four-direction joystick switch that controls machinery and equipment in wet or dusty environments, with automatic return to center when released.
A two-position manual selector switch from Schneider Electric used to manually select between two operating modes or circuits in industrial control panels and machinery.
A lighted push button switch that mounts on control panels and works with EAO Series 51 systems, rated for 250V AC power.