Precision hexagon screwdriver for delicate electronics and watch repair.

Tiny 0.7mm metric hex key in chrome vanadium for delicate work.

Cylinder deburring tool with carbide blade for metal edges up to 9.6mm.

9/16 inch hex bit for extra-large socket fastening.

Hand ratcheting crimp tool for fine wire terminals and splices.

Professional nine-piece number punch for engraving digits on metal parts.

9/16 inch hex socket wrench with polished finish.

Adjustable cone deburring tool for finishing holes from 6mm to 9.6mm.

Oval carbide deburring tool for 9.6mm edges and precision chamfering.

Cylinder carbide deburring tool up to 9.6mm for edge finishing on metal parts.

Adjustable oval carbide tool for finishing oval edges and slots 6-9.6mm.

Cylinder carbide deburring tool up to 9.6mm for smooth edge finishing on metal parts.

Tree-shaped carbide deburring tool up to 9.6mm for large edge finishing work.

Facom 9/16 inch standard socket for common maintenance and assembly work.

9/16 inch imperial socket with 1/2 inch drive for mechanical fasteners.

Nine-piece number punch set for engraving digits zero to nine on metal surfaces.

Facom 9/16 inch deep 12-point socket for accessing recessed fasteners safely.

Carbide deburring burr for smoothing metal edges and surfaces after cutting or drilling.

Heavy-duty impact socket for pneumatic tools and power drills on machinery.

Hand-operated ratcheting crimp tool for small diameter electrical wire connectors.

Compact hydraulic bearing puller with 0.9-tonne force for precision bearing removal.

Carbide tree-shaped deburring tool for removing sharp edges from metal parts.

Five-piece L-shaped hex key set for equipment maintenance and assembly work.

Deep socket for accessing long fasteners in confined areas.

Small imperial socket for precision fastening and assembly.

Flexible socket for reaching fasteners at angles and tight spaces.

Standard impact socket for half-inch pneumatic tools on American fasteners.

Ultra-precision stripper for delicate wires from 0.2 to 0.8 millimetres diameter.

Set of 9 number punches for stamping digits 0 to 8 on metal surfaces and marking.

Set of nine medium number punches for stamping and engraving digit marks.

Set of 10 small number punches for marking and engraving digits on materials.

Cone-shaped carbide burr for deburring edges around 9.6mm on metal parts.

Cylindrical carbide deburring tool for holes and bores up to 9.6mm diameter.

Precision cylinder deburring tool with carbide blade for 6-9.6mm edges.