A safety grounding block that mounts on DIN rail and connects cables up to 6mm thick using a squeeze-clamp method.
A grey electrical connector block that lets you quickly connect and disconnect wires in control panels using a simple push-in method.
Blue electrical connector block that mounts on DIN rail and accepts wires up to 10 mm² using simple push-in method.
Grey electrical connector block that attaches to DIN rail and secures wires up to 6mm thickness using a screw clamp method.
A grey electrical terminal block that connects wires safely in control panels and machinery using a simple screw tightening method.
Green and yellow safety grounding terminal block for use in explosive and dangerous areas, using a simple screw fastening method.
A blue two-layer electrical terminal block that connects wires safely in control panels and machinery using a screw fastening method.
A small fused connector block for industrial control panels that safely joins 2.5mm electrical cables using a clamp method.
A green and yellow safety grounding terminal block that connects wires with a simple push-in method, used in electrical cabinets and control panels.
A grey industrial terminal block that connects large electrical cables safely to control panels and machinery using a simple push-in method.
Brown electrical terminal block for safely connecting 4mm² wires in industrial control panels using a simple screw clamp method.
Industrial electrical terminal block that mounts on standard DIN rail and accepts small to medium wires using a simple push-in method.
A grey electrical connector block that lets you safely connect and disconnect wires in industrial control panels using a screw fastening method.
A beige industrial electrical connector block that safely joins wires in control panels and machinery using a simple screw tightening method.
A beige fused terminal block that safely connects wires in electrical panels and control systems using a simple screw fastening method.
A 13-position electrical connector block that lets you safely connect multiple wires using a simple push-in method, ideal for control panels.
A grey two-level electrical connector block that mounts on DIN rail and accepts 4mm² cables using simple push-in connection method.
This is a certified electrical connector block for dangerous areas where explosive gases or dust may be present, using a simple push-in method to attach wires.
A safety grounding block designed for hazardous industrial areas that safely connects two earth wires using a simple push-clamp method.
Yellow electrical terminal block that connects wires safely in control panels using a simple squeeze-clamp method, rated for up to 24 amps.
A grey electrical connection block that lets you safely wire cables up to 4mm thickness into control panels and machines using a simple push-in method.
A blue electrical connector block that securely holds 4mm² wires using a screw tightening method, commonly used in control panels and machinery.
A heavy-duty grey electrical connector block for industrial machines that safely handles large power cables using a simple screw connection method.
A grey 13-way electrical wiring block that lets you safely connect multiple cables in industrial panels and machines using a simple push-in method.
A specially approved electrical connector block for dangerous areas where explosive gases or dusts may be present, rated for 6mm² cables with a screw connection method.
A blue electrical connector block that screws onto a DIN rail and lets you quickly connect wires up to 4mm thick using a simple push-in method.
Grey electrical connector block that clips onto DIN rail in control panels, lets you safely connect wires using a spring clamp method.
Industrial brown terminal block for connecting wires inside electrical panels, rated for 10 amps at 400 volts with a simple screw tightening method.
A heavy-duty industrial electrical connector that joins large power cables using a push-in method, designed for three-phase systems in factories and plants.
Industrial blue terminal block that connects four wires at once onto a DIN rail using a simple push-in method, rated for 250 volts and 10 amps.
Industrial electrical connector block in grey that mounts on DIN rail and accepts wires from 0.14 to 4 mm² using a simple push-in connection method.
A grey electrical connection block for control panels that accepts 2.5mm wires using a quick spring-squeeze method, certified safe for industrial use.
A grey electrical connector block that mounts on DIN rail and accepts cables up to 4mm thick using a simple push-in method, commonly used in control panels and automation cabinets.
Grey electrical connector block that snaps onto DIN rail and accepts wires up to 4 mm² using a simple push-in method—ideal for control panels and machine wiring.